Keysight U8480 Series - Memory:state:define <Character_Data>,<Numeric_Value

6 MEMory Subsystem
152 U8480 Series Programming Guide
MEMory:STATe:DEFine <“character_data”>,<numeric_value>
This command is used to associate a name with a save/recall register number.
Syntax
Parameters
Example
Query
MEMory:STATe:DEFine? <“character_data”>
The query returns the register number for the given register name.
Item Description/Default Range of values
character_data
Details the register name. A maximum of 12 characters can be
used.
A to Z (uppercase)
a to z (lowercase)
0 to 9_ (underscore)
numeric_value A numeric value (<NRf>) for the register number. 0 to 9
MEM:STAT:DEF “SETUP1”,4 This command names register 4 SETUP1.
MEM
:STAT
numeric_value
:DEF
,
Space
?
Space
“character_data”
“character_data”