Keysight U8480 Series - [Sense[1]:]Correction:dcycle|Gain3:State <Boolean

8 SENSe Subsystem
196 U8480 Series Programming Guide
[SENSe[1]:]CORRection:DCYCle|GAIN3:STATe <boolean>
This command is used to enable and disable the pulse power measurement.
Syntax
Example
Reset condition
On reset, the pulse power measurement is disabled.
CORR:DCYC:STAT 1 This command enables the pulse power
measurement.
1
:STAT
0|OFF
1|ON
Space
?
:DCYCCORR
:
SENS
:GAIN3