Keysight U8480 Series - [Sense[1]:]Buffer:count <Numeric_Value

SENSe Subsystem 8
U8480 Series Programming Guide 187
[SENSe[1]:]BUFFer:COUNt <numeric_value>
This command sets the buffer size for average trigger measurement. It must be
used in conjunction with an external trigger.
Syntax
Parameters
Example
Reset condition
On *RST, the value is set to 1.
Item Description/Default Range of values
numeric_value
A numeric value for the buffer size:
– DEF: 1
– MIN: 1
– MAX: 250
1 to 250
DEF
MIN
MAX
BUFF:COUN 100 This command sets the average trigger measurement buffer
size to 100.
:COUN
Space
?
numeric_value
DEF
MIN
MAX
MAX
Space
SENS
1
AVER
:
MIN