Keysight U8480 Series - Page 168

6 MEMory Subsystem
168 U8480 Series Programming Guide
Example
Query
MEMory:TABLe:SPARam? <S11|S12|S21|S22>
The query returns a list of magnitude-phase pairs for the currently selected
S-Parameter table.
Query example
Error messages
– If a table has not been specified using the MEMory:TABLe:SELect command,
the data cannot be entered into the table and error –221, “Settings conflict”
occurs.
MEM:TABL:SPAR S11,0.3,100 This command sets the values 0.3 and 100
as a magnitude-phase pair for the S11
S-Parameter.
MEM:TABL:SPAR? S11 Queries the S11 magnitude-phase pairs for
the currently selected S-Parameter.