SENSe Subsystem 8
U8480 Series Programming Guide 193
Query
[SENSe[1]:]CORRection:CSET2:STATe?
The query returns a 1 or 0 into the output buffer indicating whether a table is
enabled or disabled.
– 1 is returned when the table is enabled
– 0 is returned when the table is disabled
Query example
Error messages
If you attempt to set this command to ON and no table has been selected using
[SENSe[1]:]CORRection:CSET2[:SELect], error –221, “Settings conflict” occurs
and [SENSe[1]:]CORRection:CSET2:STATe remains OFF.
CORR:CSET2:STAT? Queries whether there is currently an active
frequency-dependent offset table for the
U8480 Series.
To Next Page
Loading...