Keysight U8480 Series - Page 321

TRIGger Subsystem 12
U8480 Series Programming Guide 321
Query
TRIGger[:SEQuence[1]]:COUNt?
The query returns the current setting of trigger events for the U8480 Series.
Query example
Error message
If COUNt is >1 when [SENSe[1]:]MRATe <character_data> is set to NORMal or
DOUBle, error –221, “Settings conflict” occurs.
TRIG:COUN? Queries the number of triggered events for
the U8480 Series measurement cycle.