Keysight U8480 Series - Page 323

TRIGger Subsystem 12
U8480 Series Programming Guide 323
Reset condition
On reset, TRIGger[:SEQuence[1]]:DELay:AUTO is set to ON.
Query
TRIGger[:SEQuence[1]]:DELay:AUTO?
The query enters a 1 or 0 into the output buffer indicating the status of
TRIGger[:SEQuence[1]]:DELay:AUTO.
– 1 is returned when it is ON
– 0 is returned when it is OFF
Query example
TRIG:DEL:AUTO? Queries the settling-time delay of the U8480 Series.