MD-11 Flight Crew Operations Manual
k
FMS -
Controls and Displays
FMS.30.3
PERF - Selects PERF page for performance modes.
INIT - Selects F-PLN INIT page for initialization.
TO/APPR - Selects TAKEOFF page when on the ground or APPR page in
flight.
F-PLN - Provides access to the flight plan by leg description of the active
flight plan route.
PROG - Selects PROGRESS page to view dynamic flight and navigation
data, including FOM, TO, NEXT, DESTINATION, and ALTERNATE
waypoints. Actual and estimated times of arrival, altitudes, predicted fuels,
and wind/temp data are available for review.
FIX - Selects FIX INFO page. Provides radial entry from a waypoint or
navaid reference not on the active route (creates intercept points on the active
route). Predictions are displayed for distance-to-go as well as estimated
arrival time and altitude at the intercept point on the flight plan route.
SEC F-PLN - Selects SEC F-PLN INIT page for planning or evaluating
changes to the active flight plan.
REF - Selects REF INDEX page where several reference pages can be
accessed including A/C STATUS, SENSOR STATUS, WAYPOINT,
DEFINED WAYPOINT, POS REF, CLOSEST AIRPORT, and NAVAID.
ENG OUT - Provides manual access to the F-PLN or PERF page for review
of engine-out performance. Automatic access is provided when the FCC
detects an engine-out condition.
MENU - Selects MENU page to choose subsystems. The MENU page also
provides for selection of standby operation.
PAGE - Selects additional pages of a set when another page is required to
complete the display of data. This function is indicated by a horizontal arrow
on the right side of the title line. The PAGE function is closed loop (wrap
around from last page to first).
Up/Down Arrow - Provides up and down scrolling of flight plan, SID, STAR,
and runway data that cannot be displayed on a single page. Can also be used
to increment the latitude and longitude of the initial position data on the
F-PLN INIT page.
October 02, 2006
To Next Page
Loading...