MD-11 Flight Crew Operations Manual
k
FMS -
Controls and Displays
FMS.30.48
PROC TURN Page
This page allows the flight crew to insert or modify a procedure turn at the revise
waypoint.
Upon entry of the data, the computer checks to see if the procedure turn entries are
acceptable. If they are, the *INSERT prompt appears in 6L (without the * for
alternate and secondary flight plans). If the turn is inserted, the aircraft will turn
to the OUTB CRS from the revise point (BUMPY), fly out a distance equal to INB
DIST, make the turn rolling out on the INB CRS and re-cross the revise point. The
return prompt is in line 6R to enable return to the LAT REV page without insertion
of the procedure turn.
During an active procedure turn, entry of data is not allowed.
database procedure turns will be displayed on the ACT F-PLN page.
LB1-3-0090
1L
2L
3L
4L
5L
6L
1R
2R
3R
4R
6R
5R
October 02, 2006
To Next Page