MD-11 Flight Crew Operations Manual
k
Instrumentation and Navigation Chapter Inst
Controls and Displays Section 30
Inst.30.1
Inst.30 Instrumentation and Navigation-Controls and Displays
EIS Control Panel
1. MAG/TRUE Changeover Button
Controls the reference for the heading/track indicator on the ND. If MAG is
selected the reference will be magnetic north. If TRUE is selected the
reference will be true north.
2. VOR Mode Switch
Push to select VOR mode on the ND. VOR mode allows the display of full
compass rose and a course deviation indicator. VOR display is compatible
with MAP and APPR mode display. Weather data may be displayed in the
VOR mode.
3. APPR Mode Switch
Push to select APPR mode on the ND. APPR mode is identical to the VOR
mode except that the CDI data source is an ILS receiver. No TO/FROM
display is shown in the APPR mode.
4. TCAS Mode Switch
Push to select TCAS display on the ND with 2 nm range ring and auto range
to 10 nm.
1
2
4
5
6
8
7
9
10
11
12
13
14
15
DATA
WPT
VOR
NDB
ARPT
MAP
PLAN
VOR1
ADF1
VOR
APPR
RANGE
INCR
DECR
TRUE
TCAS
TRFC
VOR2
ADF2
WX BRT
PUSH
ON/OFF
MAG
BARORA
MINIMUMS
PUSH-RESET
HP
IN
BAROSET
QFE
QNH
PULL-STD
3
GLARESHIELD, RIGHT AND LEFT SIDE
LB1-3-0159
October 02, 2006
To Next Page
Loading...