MD-11 Flight Crew Operations Manual
k
Warning and Alerting -
Description and Operation
Warn.10.7
When level 1 or 2 alerts have been reset by pushing the associated cue switch on
the SDCP, the alert is removed from the alert list on the EAD and a reminder
message consisting of the associated system name FUEL, HYD, etc., is shown in
a dedicated location within the two bottom lines of the right column on the EAD.
These reminder messages are amber and are boxed for level 2 alert messages and
amber and unboxed for level 1 alerts.
Where one failure may create multiple consequential alerts only the highest order
alert is displayed on the EAD. The other alerts are inhibited.
October 02, 2006
To Next Page
Loading...