Korg Oasys - Saving Wave Sequences

Using Wave Sequences Saving Wave Sequences
163
6thnote:2,3,4,5,6
7thnote:3,4,5,6
8thnote:4,5,6
9thnote:5,6
10thnote:6
11thnote:2,3,4,5,6
etc…
IfRepeatTimesis1,Note‐OnAdvancewillmakethe
WaveSequenceplayasfollows:
firstnote:2,3,4,5,
3,4,5,6
2ndnote:3,4,5,3,4,5,6
3rdnote:4,5,3,4,5,6
4thnote:5,3,4,5,6
5thnote:3,4,5,6
6thnote:4,5,6
7thnote:5,6
8thnote:6
9thnote:2,3,4,5,3,4,
5,6
10thnote:3,4,5,3,4,5,6
11thnote:4,5,3,4,5,6
12thnote:5,3,4,5,6
13thnote:3,4,5,6
14thnote:4,5,6
15thnote:5,6
etc…
Finally,ifRepeatTimesisINF,Note‐OnAdvancewill
maketheWave
Sequenceplayasfollows.Notethatthe
WaveSequenceneverreturnstothestartstep,sinceit’s
outsideoftheloop:
firstnote:2,3,4,5,3,4,5,3,4,5,3,4,5…
2ndnote:3,4,5,3,4,5,3,4,5,3,4,5…
3rdnote:
4,5,3,4,5,3,4,5,3,4,5…
4thnote:5,3,4,5,3,4,5,3,4,5…
5thnote:3,4,5,3,4,5,3,4,5…
6thnote:4,5,3,4,5,3,4,5…
7thnote:5,3,4,5,3,4,
5…
8thnote:3,4,5,3,4,5…
9thnote:4,5,3,4,5,3,4,5…
10thnote:5,3,4,5,3,4,5…
etc…
Note-On Advance and Key Sync
Note‐OnAdvanceisalsoaffectedbythesettingofthe
KeySyncparameter.
IfKeySyncisOn,thestartpointwilladvancebyone
stepforeachnote.
IfKeySyncisOff,thestartpointwilladvancebyone
stepforeachnewphrase.Formoreinformation,see
“KeySync”onpage 723oftheParameterGuide.
Saving Wave Sequences
Onceyou’vespentallthistimeediting,you’llwantto
saveyourwork.TosaveyourWaveSequenceedits:
1. SelecttheWriteWaveSequencecommandfrom
thepagemenu,attheupperright‐handcornerof
thescreen.
Thisbringsupadialogboxwhichallowsyoutosave
theWaveSequence.
Optionally,youcanalsoselecta
newlocation,orchangetheWaveSequence’sname.
2. Pressthe“T”buttontobringupthetextedit
dialog.
YoucangivetheWaveSequenceadescriptivename
usingtheon‐screenkeyboard.
3. Afterenteringthename,pressOK.
Thetexteditwindowwilldisappear,returning
youto
themainSavedialog.
4. PressthepopupbuttonnexttoWaveSeqtobring
upthesavelocationdialog.
5. SelectalocationtosavetheeditedWave
Sequence.
Toavoidoverwritingthefactorysounds,it’ssaferto
useaslotinoneofthesevenUserbanks.
6. Afterselectingthelocation,
pressOK.
7. PressOKagaintostartthewriteprocess.
8. Ifyou’resureyouwanttowritetothislocation,
pressOKagain.
Afterthat,you’ redone!