Korg Oasys - Creating Smooth, Evolving Timbres

Using Wave Sequences Creating smooth, evolving timbres
161
•InProgramandCombimodes,ifKARMAisoff,
note‐onsaresynchronizedwiththesounding
Tempo‐modeWaveSequence,ifany.
•InProgramandCombimodes,ifKARMAison,
note‐onsaresynchronizedwithKARMA.
•InSequencemodeduringplaybackorrecording,
note‐onsaresynchronizedwiththesequence.
•In
Sequencemode,whilethesequencerisstopped,
note‐onsaresynchronizedwithRPPRand
KARMA.
EachProgram,eachCombiTimbre,andeachTrackina
SonghasitsownQuantizeTriggerssetting.
ToturnonQuantizeTriggersinaProgram:
1. GototheProgramBasictaboftheBasic/Vector
page.
2. Checkthe
QuantizeTriggersbox.
ToturnonQuantizeTriggersinaCombiorSong:
1. GototheWaveSequence/KARMAtabofthe
TimbreParameterspage(forCombis),orTrack
Parameterspage(forSongs).
Eachofthe16TimbresorTrackshasitsownQuantize
Triggersparameter.Ifyoulike,youcansetthemall
separately.
2. SettheQuantizeTriggerscheck‐boxesasyoulike.
How Quantize Triggers works
TheQuantizeTriggersfeaturetriestomakeagood
guessatwhereyouintendedthenotetobe.Ifyouplay
thenotejustabitlate–withina32ndnoteofthe8th
note–itwillassumethatyoumeantthenotetosound
onthebeatthatjustpassed.Inthis
case,thenotewill
playimmediately.
Ontheotherhand,ifyouplaythenoteuptothree
32ndnotesearly,itwillassumethatyou’ reintending
thenotetosoundonthenextbeat.Inthiscase,the
note‐onisdelayeduntilthenext8thnote.
QuantizeTriggers
Creating smooth, evolving timbres
Crossfaded Wave Sequences
Tocreateasmooth,crossfadingWaveSequence:
1. OntheSeqParameterspage,settheModetoTime.
Thisturnsofftemposynchronization,sothatyoucan
setWaveSequencedurationsinmilliseconds.
2. SetRuntoOn.
Thisisthedefaultsetting;theWaveSequencewill
movefromsteptostepautomatically.
3. Selectthe
Multisamplesthatyou’dliketouse,and
settheStart,End,andloopstepsasdesired.
4. OntheStepParameterspage,settheDurationsto
relativelylongvalues,500msormore.
5. SettheXfadeparameterstolongvaluesaswell.
Tocrossfadecontinually,withoutpausingtoheara
singlesteponits
own,settheXfadetimesthesameas
theDurations.
Note:InTimemode,theactualcrossfadetimecannot
exceedthetotaldurationofthetwostepsbeing
crossfaded.IftheXfadesettingwouldexceedthis
limit,thecrossfadetimewillbeclippedinternally.
6. AdjustthestepLevelstosmoothout
perceived
volumedifferencesbetweendifferent
Multisamples.
7. AdjusttheFade‐InandFade‐Outshapestotaste.
Theshapescanhelpyoutofine‐tunethetransitions
betweenthesteps.
Stretching or compressing the sequence
Ifyouliketheproportionsofthestepdurationsand
crossfades,butwantthewholesequencetogofasteror
slower.TheExp/Comp(Expand/Compress)button
makesthiseasy:
1. OntheStepParameterspage,presstheExp/Comp
button.
Adialogboxwillappear.
Quantize
Triggers

Quantize
Triggers
Quantize
Triggers

Quantize
Triggers
Note-On
Note-On
Wave Sequence Rhythm