Korg Oasys - Karma Function

Overview - What is KARMA? KARMA function settings
207
2. Specifythecopy‐sourcemode,bank,andnumber.
IfyouwanttocopytheGErealtimeparameter
settingsandscenesettingsfromthecopy‐source
program,choosethe“GERTPControlSettings&
Scenes”option(checked).
Ifyouwanttocopyperformancerealtime
parameterssettingsandfrontpanelsettingsfrom
thecopy‐sourceprogram,choosethe“Perf.RTP&
PanelSettings”option(checked).
Ifyoutocopythepadsettingsfromthecopy‐source
program,choosethe“Pads”option(checked).
3. PressOKtoexecutethecopy,orpressCancelif
youdecidetocancel.
Specifying the keyboard zone for the
KARMA function
Here’showtospecifythezoneofkeysthatwilltrigger
theKARMAfunction.Forexampleyoumightmake
settingssothatthekeysatthebottomofthekeyboard
willtriggerphrases,andkeysabovethisrangecanbe
playednormally.
1. AccesstheProgramP7:KARMA–GESetup/Key
Zonespage.
(Seethediagraminstep1of
“SelectingaGE”)
2. UsetheKeyZonesBottomandToptospecifythe
keyzone.
KeysyoupressandnotedatareceivedfromMIDI
INthatfallswithinthisrangewillbesenttothe
KARMAmodule.
Intheexampleshownabove,thenotesfrom
C‐1
throughB3arebeinginputtotheKARMAmodule.
WhenyouplayB3oralowernote,theKARMA
functionwillgenerateaphraseorpattern.
3. If“ThruInZone”and“ThruOutZone”areon
(checked),thenotesyouplayonthekeyboardwill
playinadditionto
thephraseorpatterngenerated
bytheKARMAfunction.
Thesetwofieldsarethesettingsforinsideand
outsidethekeyzone.
Youcanuse“TransposeInZone”and“Transpose
OutZone”totransposethenotesplayedonthe
keyboardinsemitonesteps.
Intheexampleshownabove,theB3andlower
keys
willcontrolonlythephraseorpatterngeneratedby
theKARMAfunction,andtheC4andhigherkeys
willbeusedformanualplayingonthekeyboard.
Use“TransposeOutZone”toadjustthepitchofthe
manually‐playedregion.
KARMA module MIDI filtering and CC
offset
1. AccesstheProgramP7:KARMA–MIDIFilter/CC
Offsetpage.
Receive MIDI Filter
Thisspecifieswhetherfilteringwillbeappliedto
theMIDIcontroldatareceivedbytheKARMA
module.Ifanitemison(checked),the
correspondingdatawillbereceived.
WhentheKARMAfunctionison,MIDIcontroldata
receivedbytheKARMAmoduleissentdirectlyto
thetonegenerator.If
thissettingisoff(unchecked),
thatdatawillnotbesenttothetonegenerator.
Intheexampleshownabove,damperpedal
messagesareenabledwhentheKARMAfunctionis
off,anddisabledwhenitison.
Transmit MIDI filter
Thisspecifieswhetherfilteringwillbeappliedto
theMIDIcontroldatageneratedbytheGEselected
fortheKARMAmodule.Ifanitemison(checked),
transmissionisenabled.
Normallyyouwillleavetheseitemson.Ifyoudon’t
wanttousethepitchbendorothercontrolchange
data
generatedbytheselectedGE,turntheseitems
off(unchecked).
Intheexampleshownabove,pitchbenddata
generatedbytheGEwillnotbetransmitted.
CC Offset
Usethisifyouwanttocontroltheeffectsorthe
soundoftheprogramwhiletheKARMAfunctionis
on.Forexample,youmightusethistodecreasethe
brightnessofthesoundorraisetheresonanceofthe
soundinconjunctionwiththephrasethat’sbeing
generated.Alternatively,you
mightusethisto