Korg Oasys - Sampling in Sequencer Mode

Creating songs (Sequencer mode)
120
3. SelecttheP0:Play/REC–MIDITrackProg
Select/Mixerpage.
4. Checkthe“RPPR”checkbox,andset“Track
Select”toMIDITrack02.
WhentheRPPRfunctionison,pressingakeyto
whichapatternisassignedwillcausetheassigned
patterntostartplaying,regardlessofthetrackthat’s
selectedin“TrackSelect.”
Keystowhichpatternsarenotassignedcanbe
playedintheusualway.Youcanplaytheprogram
that’sassignedtotheMIDItrackyouselecthere.
5. SinceyouwantthetracksyouplayviaRPPRand
thetrackyouplayfromthekeyboardtobe
recordedat
thesametime,checktheMultiREC
checkbox.
Note:IfRecordingSetupissetto“LoopAllTracks,”
itwillnotbepossibletoselectMultiREC.Setthe
RecordingSetuptoOverwrite.
6. PresstheSEQUENCERREC/WRITEswitchto
enterrecord‐readymode.
7. Forthetracksyouwillberecording(MIDI
Track1,
2),pressPlay/Rec/Mutetomakethemindicate
REC.
Makesurethatthetracksyou’ renotrecordingare
indicatedasPlayorMute.
8. PresstheLOCATEswitchtosetthelocationto
001:01.000.
9. PresstheSEQUENCERSTART/STOPswitch,and
thenpressakeythatplaysanRPPRpattern.
If,duringthepre
‐countbeforerecording,youpress
akeythat’sassignedtoanRPPRpattern,thepattern
willbeginplaying(andbeingrecorded)themoment
thatrecordingbegins.
RecordtheRPPRpatternplaybackandkeyboard
performance.
Whenrecordingtheplaybackofpatternstriggered
byRPPR,thetimingoftherecordedeventsmaybe
slightlyskewed.Ifthisoccurs,trysetting“REC
Resolution”toasettingotherthanHi.
10.Whenyouarefinishedperforming,pressthe
SEQUENCERSTART/STOPswitch.
Recordingwillend,andthesequencerwillreturnto
thelocationatwhichrecordingbegan.
Ifyoumadeamistakeduringyourperformanceor
wouldliketo
re‐record,youcanusetheCompare
function(presstheCOMPAREswitch)tore‐record
asmanytimesasyouwish.
11.Ifyouwanttorecordothertracks,un‐checkthe
MultiREC(Seestep5)or“RPPR”(Seestep4)
checkboxesasnecessary.
Sampling in Sequencer mode
SamplingisstillavailableinSequencermode‐which
canbeveryconvenient.Themainareasoffunctionality
aresummarizedbelow.Formoreinformation,see
“ExamplesofsamplinginSequencermode”on
page 147.
•Multisampleetc.youcreatecanbeplayedbackin
Sequencermodetogetherwithinternalprograms.
TheTimeSlicefunction
ofSamplingmodeletsyou
divideuparhythmloopsample,andcreate
playbackdatathattriggersthedividedsamplesat
theappropriatetiming.Youcanplaybackthis
performancedatainSequencermode,andadjust
theplaybacktempowithoutaffectingthepitchof
therhythmloopsample.Youcaneven
exchange
thenotenumbersoftheperformancedataor
changeitstimingtotransformtheoriginalrhythm
loopsampleintoacompletelynewrhythmloop.
•TheIn‐TrackSamplingfunctionletsyousamplean
externalaudiosourcethat’splayingalongwiththe
Sync: Off
Sync: Beat
Sync: Measure
Sync: SEQ
Key 1 on
Song
Key 2 on
Key 1 off
Sync settings
Patterns 1 and 2 are set to
Mode=Manual, and have
identical Sync settings
Pattern 1
Pattern 2
Pattern 1
Pattern 2
Pattern 1
Pattern 2
Pattern 1
Pattern 2