Korg Oasys - Other Problems

To Next Page

To Previous Page

Appendices

226

Areyouusingtherecommendedmediaforyourdrive?

IfyouarewritingfromanexternalUSBdrivetoCD‐

R/RW,itispossiblethatthetransferspeedis

insufficient.

•Writingmaybesuccessfulifyoulowerthewriting

speed.

•Writingmaybesuccessfulifyoufirstcopythedata

fromthe

externalUSBdrivetotheinternalhard

disk,andthenexecutethewritingoperationfrom

theinternalharddisk.

Areyouusingblankmedia?

•IfusingCD‐R,pleaseusenewmedia.IfusingCD‐

RW,usethepagemenucommandEraseCD‐RW

(Disk–MakeAudioCD)toerasethe

contentsofthe

mediabeforeyouexecuteSave.

An OASYS CD-R/RW is not recognized by an

external device

ACD‐R/RWsavedorcopiedontheOASYSusing

packetwritingisnotrecognizedonacomputer.

•IfyouinstallaUDFversion1.5compatibleUDF

readerorpacketwritingsoftwareonyour

computer,itwillbepossibletorecognizethedisc.

•InthecaseofaCD‐R,itmay

bepossibletomake

thediscberecognizedbyexecutingthepagemenu

commandConverttoISO9660Format(Disk–

Utilitypage)toconvertthedisctoISO9660format.

Howeverdependingonthestateinwhichthedisc

wassaved,itmaybeconvertedintoISO9660level3

format,andmay

stillnotberecognized.Inthiscase

ifyouinstallISO9660level3compatiblereader

softwareorpacketwritingsoftwareonyour

computer,itwillbepossibletorecognizethedisc.

ACD‐R/RWthatwassavedorcopiedontheOASYS

usingpacketwritingisnotrecognizedbythe

TRITON/TRITON

pro/TRITONproX/TRITON‐

Rack/TRITONLe.

•ThesemodelsdonotsupportUDFversion1.5,and

thereforewillnotrecognizesuchadisc.

•InthecaseofaCD‐R,itmaybepossibletomake

thediscberecognizedbyexecutingthepagemenu

commandConverttoISO9660Format(Disk–

Utilitypage)

toconvertthedisctoISO9660format.

Howeverdependingonthestateinwhichthedisc

wassaved,itmaybeconvertedintoISO9660level3

format,andmaystillnotberecognized.

Can’t write audio tracks

AdditionalwritingisnotpossibleonaCD‐R/RWdisc

thathasbeenfinalized.

Can’t play back the disc on an audio CD player

Didyoufinalizethedisc?

•Ifyouwanttofinalizethediscafterwriting

additionaldata,checktheExecutefinalizetoo

checkboxwhenexecutingthepagemenu

command“WritetoCD”(Disk–MakeAudioCD),

sothatthediscwillbefinalized.Formore

information,see“WritetoCD”on

page 784ofthe

ParameterGuide.

•Ifyouonlywanttofinalizethedisc,selectthepage

menucommandFinalizeAudioCD(Disk–Make

AudioCD),andpresstheOKbuttontofinalizethe

disc.Formoreinformation,see“FinalizeAudio

CD”onpage 784oftheParameterGuide.

AreyouusingCD‐

Rmedia?

•SincesomeCDplayersareunabletoplayCD‐RW

media,werecommendthatyouuseCD‐Rmedia.

Haveyoutriedusingadifferenttypeofmedia?

•SomeCD‐R/RWmediacannotbeplayedbysome

CDplayers.Youmaybeabletoplayback

successfullybyusinga

differenttype(brand)of

CD‐R/RWmedia.

WAVE files

Can’t load

IstheWAVEfileinaformatthattheOASYScanload?

•Only48kHzor44.1kHzWAVEfilescanbe

insertedintotheTrackCDListintheDiskmode

MakeAudioCDpage.

•InSequencermode,onlymonaural48kHzWAVE

filescanbeinsertedintoanaudiotrack.

Can’t preview

IstheWAVEfileinaformatthattheOASYScanload?

•Only48kHzWAVEfiledatacanbepreviewedby

pressingthePlaybuttoninthedirectorywindow.

•Youcan’tpreviewifthenameoftheWAVEfileon

externalmediaislongerthaneightcharacters.Copy

thefileto

theinternalharddiskbeforeyoupreview

it.

Korg Oasys - Other Problems

Table of Contents

Related product manuals