Korg Oasys - Loading Individual Banks from a.PCG File; Loading Data by Individual Item or Bank

Loading data from disk Loading individual banks from a .PCG file
179
Loading individual banks from a .PCG file
1. Selectthe.PCGfilecontainingthedatayouwant
toload,andchoosethepagemenucommand
“LoadSelected.”
Refertosteps1–4of“Loading.PCG,.SNG,and.KSC
files”onpage 177.”Selectthe.PCGfileinstep5.
2. Pressthepagemenubuttontoopenthepage
menu,andchoose“Load
Selected.”
Youcanloadindividualbanksbyusing“.PCG
Contents”inthedialogboxtoselecttheload‐source
bank,and“To”toselecttheload‐destinationbank.
Whenyouexecuteloading,onlytheprograms,
combinations,drumkits,andwavesequencedataof
theselectedbankwillbeloadedintothe
load‐
destinationbankyouspecify.Globalsettingdatawill
notbeloaded.
Ifyouset“.PCGContents”toBankINT‐A,and“To”to
BankINT‐A,datawillbeloadedasfollows.
Programs
•BankINT‐A:loadedintoBankINT‐A
Combinations
•BankINT‐A:loadedintoBankINT‐A
Drum
Kits
•INT:loadedintoBankINT
WaveSequences
•INT:loadedintoBankINT
Whendataisloadedintoabankthatisdifferentthan
itsoriginalbank,thedata(bank,program,pattern,and
kitnumbers,etc.)willautomaticallybereconfiguredso
thatafterloading,thevarioustypesofdatawill
correspondcorrectlyineachmode.
Thefollowingdatawillalsobereconfigured
automaticallyifyouhavechecked“Load.SNGtoo”(so
thatsongdataisloadedatthesametime),the
followingdatawillalsobereconfiguredautomatically
inordertoensurethatthesongdataplaysback
correctly.
•Thebank
ofeachprogramusedbycombinations
•Thebankofeachdrumkitandwavesequenceused
byeachprogram
•Thebankoftheprogramusedbyeachtrackofthe
song
•Ifthesongcontainstrack/patternevents,the
programbankswithintheseevents
Loading data by individual item or bank
TheOASYSletsyouloadprograms,combinations,
drumkits,andwavesequencesindividuallyorby
individualbanks.
Thisisaconvenientwaytorearrangecombinationsin
theorderinwhichyouwillusethemduringalive
performance.
Beawarethatifyouchangetheorderofprograms,
thesoundsplayed
bycombinationsmayalsobe
affected.
Asanexamplehere,wewillexplainhowa
combinationsavedinbankINT‐Dcanbeloadedinto
INT‐E000.
1. Movetothe“BankINT‐D”directory,andselect
thecombinationthatyouwanttoload.(.PCG
file/Combinations/BankINT‐D/)
Theprocedureisasfollows.
1)
Performsteps1–5under“Loading.PCG,.SNG,
and.KSCfiles”onpage 177.Selectthe.PCGfile
containingthedatayouwanttoload(itwillbe
highlighted),andpresstheOpenbutton.
2)Press“Combinations”tohighlightit,andpress
theOpenbutton.
3)Press“BankD”tohighlightit,andpressthe
Openbutton.
4)Pressthescrollbartofindthecombinationyou
wanttoload,andhighlightitinthedisplay.