Korg Oasys - MIDI Recording Procedures

Automatically importing a Combination into Sequencer mode
81
Total Effects
ThetwoTotalEffectsarededicatedtoprocessingthe
mainL/Routputs.They’reideallysuitedtooverallmix
effects,suchascompression,limiting,andEQ–butas
withtheothereffectssections,youcanuseanytypeof
effectthatyoulike.
Automatically importing a Combination into Sequencer mode
TheAutoSongSetupfeatureautomaticallyappliesthe
settingsofthecurrentCombinationtoasong.
Ifinspirationforaphraseorsongstrikesyouwhile
you’ replayingaprogramorcombination,youcanuse
thisfunctiontostartrecordingimmediately.
HolddowntheENTERkeyandpressthe
SEQUENCERREC/WRITEkey.
The“SetuptoRecord”
dialogboxwillopenandask“A r e yousure?”.Press
“OK”.YouwillautomaticallyenterSequencermode,
andwillbeintherecord‐readystate.Pressthe
START/STOPkeytostartthesequencerandbegin
recording.
Saving your edits
Onceyou’vetweakedthesoundtoperfection,you’ll
wanttosaveyourwork.Tosaveyouredits:
1. SelecttheWriteCombinationcommandfromthe
pagemenu,attheupperright‐handcornerofthe
screen.
Youcanalsocallupthismenucommandbyholding
ENTERandpressing0onthenumeric
keypad.
Thisbringsupadialogboxwhichallowsyoutosave
theCombination.Optionally,youcanalsoselectanew
location,orchangetheCombination’sname.
2. Pressthe“T”buttontobringupthetextedit
dialog.
YoucangivetheCombinationadescriptivename
usingtheon‐screenkeyboard.
3. After
enteringthename,pressOK.
Thetexteditwindowwilldisappear,returningyouto
themainSavedialog.
4. Under“To”atthebottomofthedialog,pressthe
popupbuttonnexttoCombinationtobringupthe
savelocationdialog.
5. SelectalocationtosavetheeditedCombination.
YoucanwritetoanylocationinbanksINTandUSER
A‐G.Toavoidoverwritingthefactorysounds,it’ssafer
touseaslotinoneoftheemptyUserbanks.
6. Afterselectingthelocation,pressOK.
7. PressOKagaintostartthewriteprocess.
8. Ifyou’resureyouwanttowritetothislocation,

pressOKagain.
Afterthat,you’ redone!
Formoreinformation,see“Writingaprogramor
combination”onpage 170.
Saving to disk
YoucanalsosaveandmanageCombinationsonthe
internalharddrive,andonUSBstoragedevices.For
moreinformation,see“Savingtodisks,CDs,andUSB
media”onpage 174.