Korg Oasys User Manual

Troubleshooting Wave Sequences
225
Wave Sequences
The wave sequence does not advance
IstheRuncheckboxchecked?
Swing does not work properly
Isthewavesequence’sModesettoTempo?
Isthewavesequence’sSwingResolutionset
appropriately?
Effects
Effects are not applied
Haveyouselectedeffectprogram000?
•Selectaneffectotherthan000:NoEffectfor“IFX1–
12,”“MFX1,2”or“TFX1,2.”
AretheEffectGlobalSWIFX1–12Off,MFX1&2Off,
orTFX1&2Off(GlobalP0:BasicSetuppage)settings
checked?
IfyouareinCombination,andSequencer
mode,and
mastereffectsarenotappliedwhenyouraisethe
Send1orSend2ofthetimbre/track,doesReturn1or
Return2fromthemastereffectneedtoberaised?
Alternatively,hasSend1orSend2foreach
oscillatoroftheprogramusedbythetimbre/track
beenlowered?
Note:
Theactualsendlevelisdeterminedby
multiplyingthesendsettingofeachoscillatorinthe
programwiththesendsettingofthetimbre/track.
Haveyouroutedtheoutputtoaninserteffect?
MIDI
The OASYS does not respond to incoming
MIDI data
AreallMIDIcablesconnectedcorrectly?
IstheMIDIdatabeingreceivedonthechannelon
whichitisbeingtransmitted?
The OASYS does not respond correctly to
incoming MIDI data
AretheGlobalP1:MIDIsettingsMIDIFilterEnable
ProgramChange,EnableBankChange,Enable
ControlChange,EnableAfterTouch,andEnable
Exclusiveeachchecked?
DoestheOASYSsupportthetypesofmessagesthat
arebeingsenttoit?
Incorrect response to program change messages
IstheBankMapsettingcorrect?
Disks, CDs, and USB Media
Internal hard drive, external USB devices
External USB devices are not recognized
Hasthedrivebeenformatted?
Istheexternaldeviceconnectedcorrectly?
YoumayhaveturnedonthepoweroftheUSBdevice
afterpowering‐ontheOASYS.
•ExecutethepagemenucommandScandevice
(Disk–MediaInformation)tore‐mounttheUSB
device.Formoreinformation,see“Scandevice”on
page 784
oftheParameterGuide.
“Error in writing to medium” occurs frequently
when saving data to the internal hard drive or
external device
ExecutethepagemenucommandCheckMedium
(Disk–Utilitypage)todetectandrepairerrorsonthe
media.Formoreinformation,see“CheckMedium”on
page 783oftheParameterGuide.
CD-R/RW
CD-R/RW drive is not recognized, or Can’t write
Wasthedrivesubjectedtophysicalshockorvibration
whiledataisbeingwritten?
IfyouareunabletosavedatasuchasPCGorSNG
files,hasthediscbeenformatted?
IfyouarewritingaudiotrackstocreateanaudioCD,it
isnotnecessarytoformatthedisc.

Korg Oasys Specifications

General

Type	Workstation
Timbrality	16 parts
Velocity Sensitivity	Yes
Aftertouch	Yes
RAM	1GB
Synthesis Types	HD-1, AL-1, CX-3, STR-1
Oscillators	Varies by synthesis type
LFO	Multiple LFOs per program
Filter	Varies by synthesis type
Effects	12 insert effects, 2 master effects
Sequencer	16-track MIDI
Sampling	Yes, with 16-bit/48kHz resolution
Display	10.4-inch color touch screen
Keyboard	88-key or 76-key weighted action
Storage	40GB internal hard drive
Connectivity	MIDI In/Out/Thru, USB, S/PDIF