151
Settings for the entire OASYS (Global mode)
How Global mode is structured
InGlobalmodeyoucanmakeoverallsettingsthat
applytotheentireOASYS,suchasmastertune,key
transpose,effectglobalswitch,globalMIDIchannel,
andsystemclock.
Inaddition,youcancreateuserdrumkits,wave
sequence,andscales,makesettingsforthedamper
pedalandassignablefootswitches/pedals,
andspecify
categorynamesforprogramsandcombinations.
TheeditsyouperforminGlobalmodewillbe
preserveduntilthepoweristurnedoff,butwillnot
bepreservedafterthepoweristurnedoffunless
youfirstsaveyoursettings.Threetypesofdataare
handledinGlobalmode:wave
sequencesettings
(GlobalP4),userdrumkitsettings(GlobalP5),and
allotherglobalsettings(GlobalP0–P3).Eachof
thesecanbewrittenintotheirrespectivememory
area.Thisdatacanalsobesavedtovarioustypesof
mediainDiskmode.
Formoreinformation,see“Writingglobalsettings”
onpage 173,
“Savingtodisks,CDs,andUSB
media”onpage 174.
NotethatComparecan’tbeusedinGlobalmode,
withtheexceptionofWaveSequenceandDrumKit
editing.
Globalmodepagestructure
Note:Fordetailsonhowtoaccesseachmodeandpage,
pleasesee“Basicoperations”onpage 38.
P0: Basic Setup
Tuning to another instrument/Transposing
“MasterTune”adjuststheoverallpitch.Editthis
settingwhenyouareplayingtheOASYSwithother
instruments,orwhenplayingalongwithmusiconCD
ortape.Youcanadjustthepitchinarangeof±50cents
(onesemitone=100cents).Ifthisisat0,middleA
is
tunedto440Hz.
KeyTransposeshiftsthepitchinsemitonesteps.Edit
thissettingwhenyouwanttotransposethesoundof
theentireOASYS.Youcanadjustthetranspositionina
rangeof±1octave.
Adjusting the way in which velocity or
after touch will affect the volume or tone
Youcanadjustthewayinwhichchangesinvelocityor
aftertouchwillaffectthevolumeortone.Thisletsyou
(forexample)makethevolumeofthenotesmore
consistent,evenwhentheyareplayedwithvarying
dynamics.
Eachcurvehasitsowncharacter,soyoucanselectthe
curvethatisappropriateforyourownplaying
dynamics,playingstyle,andtheeffectthatyouwishto
obtain.
VelocityCurveselectsthevelocitycurve,andAfter
TouchCurveselectstheaftertouchcurve.
Bypassing the effects
Inserteffects,mastereffects,andtotaleffectscanbe
bypassedglobally.ThisappliestotheentireOASYS
regardlessofthemode.Forexample,ifyou’ve
connectedtheOASYS’soutputstoanexternalmixer
andareusinganexternaleffectprocessortoapply
reverborchorustothesound,youcanturn
offthe
OASYS’smastereffectsandtotaleffects.
IftheEffectGlobalSW“IFX1–12Off,”“MFX1&2Off,”
and“TFX1&2Off”itemsarechecked,the inserteffects,
mastereffect,willrespectivelybebypassed.
Page Explanation
P0: Basic Setup
•Basic settings for the entire OASYS
•Audio input settings for use outside of
Sampling mode (for Use Global Setting)
P1: MIDI
•MIDI-related settings for the entire
OASYS
•MIDI controller settings in External mode
P2: Controller
/Scale
•Controller settings for the pedals etc.
connected to the rear panel
•CC settings for the KARMA controllers,
pads, and VJS
•User registered scale settings. Specify 16
octave scales, and one all-note scale.
P3: Category
Name
•Edit category/sub category names for
programs, combinations and KARMA
P4: Wave
Sequence
•Edit wave sequence
P5: Drum Kit •Edit drum kits
To Next Page
Loading...
Need help?
General
