Korg Oasys - Basic Operations; Selecting Modes

Introduction to OASYS
38
Themaximumpolyphonymayalsodependonvarious
otherparameters;formoreinformation,see“A note
aboutpolyphony”onpage 33oftheParameterGuide.
Basic operations
Afteryou’veturnedontheOASYS,here’showto
performbasicoperationssuchasselectingmodesand
pages.
1. Selecting modes
InordertouseaparticularfunctionontheOASYS,you
mustfirstselecttheappropriatemode.
Pressoneofthefrontpanelmodebuttons(COMBI,
PROGRAM,SEQ,SAMPLING,GLOBAL,orDISK)
toenterthecorrespondingmode.
2. Selecting pages
Eachmodehasalargenumberofparameters,which
aregroupedintopages.Thesearefurthersubdivided
bytabsintouptoninetabpages.
1. Makesurethatthedesiredmodeisselected.
Toselectamode,presstheappropriatemodekey
(COMBIswitch–DISKswitch).
HerewewilluseProgram
modeasanexampleforour
explanation.PressthePROGRAMswitch.
2. Pressatabinthelowerline(pagegrouptabs).
Asanexamplehere,presstheBasic/Vectortab.The
currentpageindicationintheupperleftoftheLCD
screenwillindicate“PROGRAMP1:Basic/Vector,”
andthepagegroupwillchange.
WhenyoupresstheEXITswitch,youwillreturntoP0
fromanypage.
Effect EXi Fixed Free for Voices
Resource Meter
COMBIswitch: Combinationmode
PROGRAMswitch: Programmode
SEQswitch: Sequencermode
SAMPLINGswitch: Samplingmode
GLOBALswitch: Globalmode
DISKswitch: Diskmode
P
age
g
roup Tab
P
age tab