Korg Oasys - Recording Patterns

MIDI recording Recording patterns
99
SelectanothereffectforIFX1intheP8:InsertEffect–
InsertFXpage,andedittheeffectparametervalues,
orusetheP0:Play/REC–ControlSurfacepageTone
Adjustcontrolstoeditthesoundinrealtime.
Note:Fordetailsontheeffectsparametersthatyou
canrecordinreal‐time,please
see“System
ExclusiveeventssupportedinSequencermode”on
page 618oftheParameterGuide.
3. Stoprecording.
Note:Exclusivemessagesarealwaysrecordedon
thecurrenttrackselectedby“TrackSelect.”Inthis
example,theyarerecordedonMIDItrack9.
Note:IntheMIDIeventeditscreenyoucanviewthe
recordedexclusiveeventsandtheirlocation.
Exclusiveeventsaredisplayedas“EXCL”.
Toviewtheseevents,gototheP4:TrackEdit–Track
Editpage,andselectthepagemenucommand
“MIDIEventEdit.”ThenintheSetEventFilters
dialogbox,checkExclusiveandpresstheOK
button.
Exclusiveeventscannotbechangedtoadifferent
typeofevent.Norcanothereventsbechangedinto
exclusiveevents.
4. Ifyougotothepage(e.g.,P8:InsertEffect)that
showstheparametersyouadjustedinrealtime,
youcanwatchtherecordedchangesbereproduced
whilethesongplaysback.
Exclusive messages that can be recorded in real-
time
Thefollowingexclusivemessagescanberecordedin
real‐time:
•ExclusivemessagesreceivedfromanexternalMIDI
device
• ParameterchangesinSequencermode(see“System
ExclusiveeventssupportedinSequencermode”on
page 618oftheParameterGuide)
• MasterVolumeuniversalexclusivemessages
assignedtothefootpedaloraknob
Recording patterns
Recording and editing patterns
Youcanrecordpatternsineitheroftwoways;realtime
recordingorsteprecording.However,patternrealtime
recordingdiffersfromsongrealtimerecordinginthat
youcanuseonlyLooptyperecording.
YoucaneditpatternsbyusingEventEditoperationsto
modifytherecordeddataorinsertnewdata.You
can
alsousethe“GetFromMIDITrack”pagemenu
commandtoconvertadesiredregionofperformance
datafromaMIDItrackintoapattern.Conversely,you
canusethe“PuttoMIDITrack”or“CopytoMIDI
Track”pagemenucommandstoplaceorcopythe
performancedatafrom
apatternintoaMIDItrack.
Recording patterns in real-time
Here’showyoucanuserealtimerecordingtocreatea
pattern.UserpatternscanbeaccessedbytheRPPR
functioninthesamewayaspresetpatterns,andcanbe
copiedtoorplacedinasong.Playbackdatafroma
trackcanalsobecopiedtoapattern.
Whenrealtime‐
recordingapattern,apatternofthe
specifiednumberofmeasureswillplayback
repeatedly,allowingyoutocontinueaddingmusical
datatoit.
1. Createanewsong,andasdescribedin
“Preparationsforrecording”onpage 89,setthe
tracktotheprogramthatwillbeusedbythe
pattern.
2. AccesstheP5:
Pattern/RPPR–PatternEditpage
(Seethediagrambelow).
3. Use“TrackSelect”toselectthetrackthatyouwill
usetorecordthepattern.
Thepatternwillsoundwiththeprogramandother
settingsoftheselectedtrack.
4. Set“Pattern(PatternBank)”toUser,andset
“PatternSelect”toU00.
UserpatternsU00–U99
canbecreatedforeachsong.
5. Selectthepagemenucommand“Pattern
Parameter”.
Adialogboxwillappear.
Location Event display