Korg Oasys - Automatically Importing a Program

Automatically importing a Program into Sequence mode
71
Automatically importing a Program into Sequence mode
TheAutoSongSetupfeaturecopiesthecurrent
ProgramorCombinationintoaSong,andthenputs
theOASYSinrecord‐readymode.
Ifinspirationforaphraseorsongstrikesyouwhile
you’ replaying,youcanusethisfunctiontostart
recordingimmediately.Todoso:
1. HolddowntheENTERkey
andpressthe
SEQUENCERREC/WRITEkey.
TheSetuptoRecorddialogboxwillopenandask“A r e 
yousure?”
2. PressOK.
YouwillautomaticallyenterSequencermode,andwill
beintherecord‐readystate.
3. PresstheSTART/STOPkeytostartthesequencer
andbeginrecording.