Korg Oasys - Other Ways to Record

MIDI recording Other ways to record
101
Using KARMA for pattern recording
IftheKARMAfunctionissettooperateforthetrack
thatisselectedfor“TrackSelect,”andrecordthe
performanceoftheKARMAfunctionintothepattern.
Other ways to record
Multi-track recording with KARMA
Youcanrecordmulti‐trackperformancesgeneratedby
KARMA.Formoreinformation,see“KARMA
functionsettingsinSequencermode”onpage 214.
Multi-track recording with RPPR
Youcanrecordmulti‐trackperformancesgeneratedby
RPPR.Formoreinformation,see“UsingRPPR
(RealtimePatternPlay/Record)”onpage 117.
Using the control surface to record
changes in the pan, EQ, volume, or Tone
Adjust parameters of a MIDI track
Duringrealtimerecording,youcanusethecontrol
surfacetocontrolthepan,EQ,volume,orToneAdjust
parameters,andrecordthesechangessothattheywill
bereproducedduringplayback.
Ifyouwillbeadjustingmorethanonetrack
simultaneously,you’llneedtousemulti‐track
recording.
Note:Changesyoumake
usingthecontrolsurfaceare
transmittedascontrolchangesorsystemexclusive
messages.Inordertorecordthesechanges,theGlobal
P1:MIDI–MIDI“EnableControlChange”and“Enable
Exclusive”itemsmustbechecked.MovetoGlobal
modeandmakesurethattheseitemsarechecked.
Channel after touch 00 (zero)
Pitch bender 00 (zero)
Controller Reset value