Troubleshooting Sampling
223
ArethesettingsintheCopyFromCombinationdialog
boxcorrect?
•IntheCopyFromCombinationdialogbox,check
theMultiRECstandbyoptionbeforeyouexecute
thecopy.Thiswillcausethesettingstobeadjusted
automatically.
Can’t record your performance using Tone
Adjust
ChangesyoumakeusingToneAdjustarerecordedas
systemexclusivedata.DidyouchecktheGlobalmode
MIDIFilterEnableExclusivecheckbox?
RPPR does not start
IstheSequencerP0:Play/RECRPPRsettingchecked?
(See“UsingRPPR(RealtimePatternPlay/Record)”on
page 117.)
AreAssign,PatternSelect,andTracksetcorrectly?
See“UsingRPPR(RealtimePatternPlay/Record)”on
page 117.
IftheMIDIClock(GlobalP1:MIDI)parametersetto
InternalorAuto?See“MIDIClock(MIDIClock
Source)”
onpage 710oftheParameterGuide.
Can’t record on an audio track
HaveyouuncheckedtheMemoryProtectInternal
HDDSavecheckbox(GlobalP0)?
HaveyousetTrackSelecttotheaudiotrackyouwant
torecord?
Ifyouwanttoperformmulti‐trackrecording(Multi
RECchecked),isPlay/Rec/MutesettoREC?
Aretheaudioinputsettingscorrect?
• PleaseseeAudioinput
andoutput,andAudio
inputsdon’tworkproperly.
Istherespaceremainingontheharddisk?
• DeleteunwantedWAVEfiles.
• SaveacopyofimportantWAVEfilesonexternal
media,andthendeletethemfromtheharddisk.
AretheRECSourcesettingscorrect?
A“Filealreadyexists”messageappears,andyoucan’t
record.
•IntheP0:Play/REC–Preferencepage,changethe
nameoftheWAVEfilethatyou’regoingtorecord.
• DeletethefilesintheTEMPfolder.
Can’t import WAVE files into a region of
an audio track
IntheImportRegion/WAVEdialogbox,youselecteda
WAVEfilebutcan’tpresstheOKbutton.
•Only48kHzmonauralWAVEfilescanbe
imported.
•YoucanonlydirectlyimportWAVEfilesfromthe
internalharddrive.TousefilesfromCDsor
externalUSBdevices,youmustfirstcopy
themto
theinternalharddrive,andthenimportthecopied
fileintotheSong.
Sampling
Can’t sample
Aretheaudioinputsettingscorrect?
•See“Audioinputsdon’tworkproperly”on
page 220
IsthereenoughfreeRAMmemoryforsampling?
Istherefreespaceinmemory?Formoreinformation,
see“0–1f:FreeSampleMemory/Locations”on
page 630oftheParameterGuide,and“0–9:Media
Information”onpage 755oftheParameterGuide.
•In
ordertosampletoRAMmemory,youmust
allocatesufficientspaceforsampling.
•Ifyouaresamplingtoharddisk,selectadifferent
harddisk.Formoreinformation,see“Select
Directory”onpage 144oftheParameterGuide
• Deleteunneededsamples.Formoreinformation,
see“DeleteSample”onpage 672oftheParameter
Guide.
•Saveimportantsamplesonexternalmedia,and
thendeletethemfrommemory.
Ifyou’ resamplingtotheinternalharddisk,didyou
unchecktheMemoryProtect“InternalHDDSave”
dialogbox?(GlobalP0)
Ifyou’resamplingtoexternalUSBstoragemedia,did
youselectrecordablemedia?
IstheTriggersettingcorrect?
Formoreinformation,
see“Trigger”onpage 17oftheParameterGuide.
InSamplingmodeifyouareresamplingwith
ResamplesettoAuto,hasthesampletoberesampled
beenassignedtothekeyboard,andselectedforKey?
“Applyinganinserteffecttoasampleandresampling
theresult”on
page 135.
IstheSourceBussettingcorrect?
Ifa“bufferoverrunerroroccurred”messageis
displayedfrequentlywhenyouaresamplingtohard
disk,executethepagemenucommandCheck
Medium(Disk–Utilitypage)tofindandcorrectany
errorsontheselectedMS‐DOSformatmedia.Formore
information,see“Check
Medium”onpage 783ofthe
ParameterGuide.
A stereo sample can’t be played in stereo
Isthemultisampleactuallystereo?
•Executethepagemenucommand“MSMonoTo
Stereo”toconvertthemultisampletostereo.For
moreinformation,see“MSMonoToStereo/MS
StereoToMono(ChangeMultisampleType)”on
page 676oftheParameterGuide