Korg Oasys - Page 188

Loading & saving data, and creating CDs
180
Alternatively,youcouldselectanyfile,sincethe
desiredfilecanbeselectedlaterfromthedialogbox.
Note:WhenyoupressthekeyboardoftheOASYS,the
selectedcombinationwillsound.However,the
internalprogramswillbeusedastheprogramofeach
timbre.
2. Pressthepagemenubuttonandselect
the“Load
Selected”pagemenucommand.
Thedialogboxwillappear.
3. Usethe“Combination”(upperline)toselectthe
load‐sourcecombination,anduse“(To)
Combination”(lowerline)tospecifythe
destinationcombination.Forthisexample,select
INT‐E000.
Asshippedfromthefactory,thisCombilocationis
empty;ithasno
name,andmakesnosound.
4. PresstheOKbuttontoexecuteloading;theloaded
combinationwillbeassignedtoINT‐E000.