Korg Oasys - Page 175

Using Drum Kits Saving Drum Kits
167
YoucangivetheDrumKitadescriptivenameusing
theon‐screenkeyboard.
3. Afterenteringthename,pressOK.
Thetexteditwindowwilldisappear,returningyouto
themainSavedialog.
4. PressthepopupbuttonnexttoDrumKittobring
upthesavelocationdialog.
5. Selectalocationto
savetheeditedDrumKit.
Toavoidoverwritingthefactorysounds,it’ssaferto
useaslotinoneofthesevenUSERbanks.
NotethatalthoughyoucaneditGeneralMIDIkits,you
canonlysavetheseeditstolocationsintheINTor
USERbanks.TheoriginalGMkitscannot
beover‐
written.
6. Afterselectingthelocation,pressOK.
7. PressOKagaintostartthewriteprocess.
8. Ifyou’resureyouwanttowritetothislocation,
pressOKagain.
Afterthat,you’ redone!