Korg Oasys - Page 48

Introduction to OASYS
40
berecalled.WhenyoupresstheCOMPAREswitch
onceagain,theLEDwillgodarkandyouwillreturnto
thesettingsthatyouwereediting.
Ifyoueditthesettingsthatarerecalledbypressingthe
COMPAREswitch(i.e.,thesettingsthatarewritten
intomemory),theLEDwillgo
dark,anditwillnotbe
possibletoreturntothepreviouseditsbypressingthe
COMPAREswitchagain.
InSequencermode,youcanusetheCOMPAREswitch
tomake“beforeandafter”comparisonsimmediately
afterusingrealtimerecordingorsteprecordingto
recordasong,orafterperformingatrack
edit
operation.
Forexample,thiscanbeusedeffectivelywhen
realtime‐recordingatrackforasong.
1. Realtime‐recordaMIDItrack.(Take1)
2. Onceagain,realtime‐recordonthesametrack.
(Take2)
3. PresstheCOMPAREswitch.TheLEDwilllight,
andtake1willberecalled.
4. PresstheCOMPAREswitchonce
again.TheLED
willgodark,andtake2willberecalled.
5. Ifatstep3youonceagainrealtime‐recordonthe
sametrack(take3),theobjectoftheCompare
functionwillnowbetake1.
Ifatstep4youonceagainrealtime‐recordonthesame
track(take3),theobjectoftheComparefunctionwill
betake2.
Inthisway,theComparefunctionletsyourecallthe
previousrecordingorthepreviousstateofevent
editing.
TheComparefunctiondoesnotworkinGlobalmode,
withtheexceptionofSampling,Disk,WaveSequence,
andDrumKitediting.
Popup buttons and popup menus
Youcanpressapopupbuttontoaccessapopupmenu,
andthensetparametervalues.
Keyboard input
Whenenteringanotenumberoraspecificvelocityas
thevalueofaparameter,youcanusethekeyboardto
inputthesetting.HolddowntheENTERswitchand
playthenotethatyouwishtoenterasavalue.The
notenumberorvelocityvaluewillbeinput.
When
theGlobalP5:DrumKitpageisdisplayed,you
canholddowntheENTERswitchandplayanoteto
recallthesettingsthathavebeenassignedtothatnote.
(Iftheparameteryou’veselectedexpectsyoutoentera
velocityvalue,thevelocityyouplayedwillbeentered.)
InSampling
mode,youcanholddowntheENTER
switchandplayanotetorecalltheindexthatis
assignedtothatnote.