Korg Oasys - Page 56

Playing and editing Programs
48
Changing the Bank Type for USER-A…G
BankscancontaineitherHD‐1ProgramsorEXi
Programs,butnotboth.Thisassignmentisfixedfor
theInternalbanks,butcanbesetseparatelyforeachof
theUSERbanks.
TochangethetypeofaUSERbank:
1. Pressthefront‐panelGLOBALbuttontoenter
Globalmode.
2. Selectthe
Basictab.
3. Pressthepagemenubutton,andselectSet
ProgramUser‐BankType.
4. ChangetheTypeforthedesiredbanks.Leaveall
oftheotherbankssetto“NoChange.”
Settingabank’stypewillerasealloftheProgramdata
inthebank‐somakesurethatyou’ renoterasing
any
Programsyouwanttokeep!
5. PresstheOKbutton.
An“areyousure?”dialogappears.
6. Ifyou’recertainofthechange,pressOKagain.
Theselectedbankswillnowbeinitializedtousethe
newProgramtypes.
Using the front-panel buttons
1. MakesurethatthePROGRAMbutton,under
MODE,islit.
Thismeansthatyou’ reinProgrammode,inwhichyou
canselectandeditPrograms.Ifthebuttonisn’tlit,
pressitnow;itwilllightup,andthemainProgram
Playpagewillappear.
2. Ifyou’realreadyinProgrammode,go
tothemain
ProgramPlaypage.
ThemainPlaypageshowsanoverviewofthesound
structure,suchasoscillators,filters,etc.
3. MakesurethattheProgramnameisselected.
Ifitisnotselected,gotothePROGRAMP0:Playpage
andtouchtheProgram’sname,sothatit’shilighted.
4. Use
theVA L UE controllerstoselecttheprogram
numberthatyouwishtoplay.
Youcanusethefollowingmethodstoselectaprogram.
•TurntheVal uedial.
•PresstheIncorDecbuttons.
•Usethenumerickeypad[0]–[9]tospecifythe
number,andpresstheENTERkey.
5. PressaBANKbutton(INTor
USERA‐G)to
switchbanks.
WhenyouselectadifferentBank,thebutton’sLEDwill
light,andthesel ectedbankwillappearontheupper
leftsideoftheLCDscreen.
Forexample,toselectbankINT‐B,presstheBbutton
inthetoprowofBankbuttons.The
Bbuttonwilllight,
andthenameINT‐Bwillappearintheupperleftofthe
LCDscreen.
Selecting by Bank and number
YoucanselectProgramsfromalistorganizedby
Programbank.
1. PresstheProgramSelectpopupbutton.
TheBank/ProgramSelectdialogappears.
Bank/ProgramSelectmenu
Inthisillustration,bankAisselected.Thelistonthe
rightshowstheProgramscontainedinthatbank.
2. Pressthetabsontheleftsideofthedisplayto
selectabank.
3. PressoneoftheProgramnamesinthelisttoselect
aProgram.
TheselectedProgramwillbehighlighted,andthe
keyboardwillimmediatelyswitchtothenewsound.
4. Ifyoulike,playafewnotestohearthenew
Program.
YoucanplaythenewProgramwhile
themenuisstill
showing,withoutneedingtopressOK.
5. WhenyouaresatisfiedwiththeselectedProgram,
presstheOKbuttontoclosethepopupmenu.
IfyoupresstheCancelbutton,theselectionyoumade
herewillbediscarded,andyouwillreturntothe
programthathadbeen
selectedbeforeyouopenedthe
menu.
Selecting by Category
YoucanselectProgramsfromwithinacategory,such
askeyboard,organ,bass,anddrums.Whenshipped
fromthefactory,thepreloadedProgramsare
organizedinto16categories,eachwithseveralsub‐
categories.Therearealso2morecategories,initially
namedUser16andUser17,whichyoucanuseand

renameasdesired.
1. PresstheCategorypopupbutton.
TheCategory/ProgramSelectdialogappears.