2NJ/2RK
2-56
(4) Document table (DT-730(B))
Bundled parts of Document table DT-730(B) (1902LC0UN2)
Tray stay 1 pc
Tray mounting plate 1 pc
Tray cover 1 pc
Tray lower cover 1 pc
Tray fixing plate 1 pc
Sheet 2 pcs
Pin 2 pcs
Nut M4 2 pcs
Screw (M4x8 screw with the binding head) 7 pcs
Screw (M4x14 screw with the binding head) 2 pcs
Procedures
1. Turn the power switch off and disconnect the power plug.
2. Pull up the operation unit (a).
3. Remove one screw (b) (M3x8) and then remove the rear operation unit cover(c) in the direction of the arrow.
Figure 2-101
4. Remove one screw (a)(M4x8).
Figure 2-102
c
b
a
To Next Page
Loading...
