2WA/2NJ/2RK
6-9
(2-1) Content of the maintenance mode
Contents
Prints the list of the current settings of the maintenance items, paper jam and service call error
occurrences. Output the event log and service status page.
Also, sends output data to a USB memory.
Purpose
Checks the current settings of the maintenance items, paper jam and service call error occur-
rences.
Before initializing or replacing the backup memory, print the list of the current settings of the
maintenance items to reenter the settings after initialization or replacement.
Method
1.Press the [Start] key.
2.Select the item to output.
3.Press the [Start] key to output the list.
* :If A4 paper is available, it is output with this size. If A4 paper is unavailable, sekect the paper
source. Output status is displayed.
* :Unable to output LLU Report to a USB memory but only available of print
Method: when sending output data to a USB memory
1.Press the [Start] key.
2.Insert a USB memory into the USB memory slot.
3.Select the item to send.
4.Select [USB(Text)] or [USB(HTML)].
5.Press the [Start] key.
* :The output data is sent to the USB memory.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U000 Printing Maintenance Report
(Message: Output Maintenance Report)
Items Output list
Maintenance Maintenance mode setting list
User Status Output User Status Page
Service Status Output Service Status Page
Event Output the event log report
Network Status Output Network Status Page
LLU Report Output LLU Report
All All reports output
Items Output list
Print A report is printed.
USB(Text) Destination: send to USB memory (text format)
USB(HTML) Destination: send to USB memory (HTML format)
To Next Page
Loading...
