Kyocera TASKalfa 8002i

2WA/2NJ/2RK
7-81
(1-5) Paper jam caused by improperly loaded paper in the cassette or the paper deck
(1-6) Paper jam due to the inferior paper
Step Check description Assumed cause Measures Reference
1 Relocating the paper width
guides
The locations of the paper
width guides do not fit with
the paper size.
Relocate the paper width
guides or the MP paper width
guides along the paper size
when the paper skew or the
paper creases occur.
2 Checking the paper The paper fanning is not
enough.
Fan paper and reload it in the
paper source. If a part of the
paper is bent, remove it.
3 (When feeding the paper
from the large capacity
feeder) Checking the
paper
The paper is not properly
loaded.
When the paper is loaded
over the guide in the deck of
the large capacity paper
feeder, reload the paper so
the paper edge is not on the
corner of the deck.
Step Check description Assumed cause Measures Reference
1 Checking the paper Unspecified papers are
used.
Explain to the user to use the
paper within the specifica-
tions.