2WA/2NJ/2RK
4-237
(4-2) Detaching and reattaching the lift motor
Procedures
1. Remove four screws (a)(M4x8) and
remove the rear cover.
Figure 4-365
2. Disconnect the connector (a).
3. Remove two screws (b)(M4x8) and
remove the Pf lift motor (c).
4. Check or replace the PF lift motor (c)
and then reattach the parts in the origi-
nal position.
Figure 4-366
b
a
a
a
a
14j0543
a
c
b
c
14j0547
To Next Page
Loading...
