Kyocera TASKalfa 8002i

2WA/2NJ/2RK
7-570
(7) PC window shows [Print job error] or [Standby], or [Printer unavailable] is
indicated on the printer properties.
The main unit is not ready to print
(8) Processing and Memory lamps are lit while the printer standby message is
indicated
The main unit locks up.
(9) Data is not printed out in Sleep mode due to the main unit startup error.
Processing/Memory lamp is turned on.
The main unit locks up.
Step Check description Assumed cause Measures Reference
1 Clearing the error The main unit is not ready
to print
Check if the error appears on
the operation panel or the
error lamp blinks. Then if
there is, cancel it.
2 Checking the main unit The main unit is not ready
to print
Resolve the problem at the
main unit if any
Step Check description Assumed cause Measures Reference
1 Clearing the error The main unit is not ready
to print
After confirming no error is
indicated on the main units
operation panel, cancel all
PC print jobs. Then, turn the
power switch and the main
power switch off. After 5s
passes, turn the main power
switch and the power switch
on.
Step Check description Assumed cause Measures Reference
1 Checking the firmware The firmware is not the lat-
est version.
Upgrade the firmware to the
latest version.
Firmware
Update
2 Checking the settings The sleep level is not set to
Quick Recovery mode.
Turn the power switch and
the main power switch off .
After 5s passes, turn on the
main power switch and the
power switch. Then, set the
sleep level to "Quick Recov-
ery".
?