2WA/2NJ/2RK
7-583
(9) Abnormal sound from the lower side than the fuser eject section
Rubbing sound between the bushing and the stop ring of the fuser eject roller due to the smudges / foreign
objects adhesion
(10)Abnormal sound from the upper side of the fuser eject section
Rubbing sound between the fuser eject pulley and the shaft due to the smudges / foreign objects adhesion
(11)Abnormal sound from the fuser section
Smudges / foreign objects adhesion or the interference between the parts in the fuser section
2 Cleaning and applying the
grease
The shaft or the bushing is
dirty or foreign objects are
on them.
Clean the shaft and the bush-
ing of the MP paper feed pul-
ley and apply the grease to
them.
3 Checking the MP retard
pulley
The MP retard pulley sur-
face is dirty or worn down.
Clean the MP retard pulley
surface and replace it if nec-
essary.
4 Checking the lift plate The lift plate is not properly
attached.
Reattach the lift base.
Step Check description Assumed cause Measures Reference
1 Cleaning and applying the
grease
The left fuser eject roller,
bushing or the stop ring
are dirty, or foreign objects
are on them.
Clean the left fuser eject
roller, bushing and the stop
ring and apply the lubricant to
them.
2 Replacing the fuser unit The fuser unit is faulty. Replace the fuser unit. Detaching
and Reat-
taching the
fuser unit
Step Check description Assumed cause Measures Reference
1 Cleaning and applying the
grease
The pulley or the shaft is
dirty, or foreign objects are
on them.
Clean the fuser eject roller
and the shaft and apply lubri-
cant to them.
2 Replacing the fuser unit The fuser unit is faulty. Replace the fuser unit. Detaching
and Reat-
taching the
fuser unit
Step Check description Assumed cause Measures Reference
1 Cleaning and applying the
grease
The bushing or the gear is
dirty or foreign objects are
on them.
Clean the bushings and the
gears for the fuser rollers,
and apply grease to them.
Step Check description Assumed cause Measures Reference
To Next Page
Loading...
