2WA/2NJ/2RK
4-146
(5-3) Detaching and reattaching the lift motor
Procedures
1. Remove the power source assembly.
2. Disconnect the connector (white)(a).
3. Disconnect the connector (gray)(b).
4. Remove each two screws (c)(M3x8)
and remove the lift motor 1 (d) and the
lift motor 2 (e).
5. Check or replace the lift motor and then
reattach the parts in the original posi-
tion.
Figure 4-216
d
e
e
d
a
b
c
c
14j0304
To Next Page
Loading...
