Kyocera TASKalfa 8002i

2WA/2NJ/2RK
3-67
(10)Feedshift/switchback section
The feedshift/switchback section consists of the conveying path which sends the paper that haspassed the
fuser section to the bridge section, duplex conveying section or job separator.
Figure 3-51
7
6
8
1
2
3
4
5
9
10
11
13
12
1. Middle pulley
2. Eject roller
3. Eject pulley
4. Eject roller B
5. Eject pulley B
6. Upper duplex roller
7. Duplex pulley
8. Lower duplex guide
9. Lower change guide
10. Upper change guide
11. Eject sensor
12. Reversing sensor
13. Actuator
(Reversing sensor)