2WA/2NJ/2RK-2
2-143
2-4 About Optional Applications
*1: This can be used on a trial basis for a limited time.
*: Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
*: If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
Starting Use of an Application
Use the procedure below to start using an application.
1. Select [System Menu/Counter] key > [System/Network] > [Optional Function].
Note
If the user authentication screen is appeared, enter your login user name and login password and select [Login].
Login with administrator privileges.
The factory default login user name and login password are set as shown below.
2. Select the desired application to start use and select [Activate].
*: You can view detailed information on the selected application by selecting [ ] or [Details].
3. Select [Official] and enter a license key.
Some applications do not require you to enter a license key. If the license key entry screen does not appear, go to
Step 4.
To use the application as a trial, select [Trial] without entering the license key.
4. Select [Yes] in the confirmation screen.
Icons of activated application are displayed in the Home screen.
Note
If you started the Security Kit or Thin Print option and entered the license key, turn the power OFF/ON. Icons of acti-
vated application are displayed in the Home screen.
application
Data Security Kit Internet FAX kit
Card Authentication Kit*1 Emulation upgrade kit
ThinPrint Option*1
Model Name 70 ppm
model
80 ppm
model
90 ppm
model
Login User Name 7000 8000 9000
Login Password 7000 8000 9000
Item
Function
License
Trial Counts
Date of Trial
Status
To Next Page
Loading...
