2WA/2NJ/2RK
4-147
(5-4) Detaching and reattaching the PF lift motor
Procedures
1. Remove three screws (a)(M4x8) and
remove the PF rear cover (b).
Figure 4-217
2. Disconnect each the connector (a).
3. Remove each three screws (b)(M3x8)
and then remove the PF lift motor 1 (c)
and the PF lift motor 2 (d).
4. Check or replace the PF lift motor and
then reattach the parts in the original
position.
Figure 4-218
D
D
D
14j0225
E
b
c
a
b
d
c,d
14j0305
To Next Page
Loading...
