2NJ/2RK
2-35
(12-4) Set paper in the side feeder
1. Pull the cassette completely out of the main unit.
Figure 2-64
2. Load paper.
*: Initial paper size is A4. When the paper size is wanted to change B5 or Letter, refer to the installation guide.
Figure 2-65
Note
Load the paper with the print side facing up.
Before loading paper in the cassette, fan the paper taken from a new package to separate it. (P.2-24See page )
Before loading the paper, be sure that it is not curled or folded. Such paper may cause paper jams.
Make sure that the loaded paper does not exceed the level indicator (see the illustration above).
To Next Page
Loading...
