Kyocera TASKalfa 8002i

2WA/2NJ/2RK-2
2-144
2-5 Initializing procedures after installing the FAX system
1. Connect the power plug of the main unit to the
outlet and turn the power on.
2. Input "10871087" using the numeric keys to enter the maintenance mode.
3. Input "600" using the numeric keys and press the [Start] key.
4. Select [Country Code] and enter a destination code using the numeric keys.
*: Refer to the following destination code list.
5. Select [Execute].
6. Press the [Start] key to start data initialization.
*: Press the [Stop] key to cancel the data initialization.
Destination code list
7. After completing installation, execute communication test to check if FAX normally operates.
Destina-
tion code
Destination Destina-
tion code
Destination
000 Japan 253 CTR21 (European nations)
009
Australia
↑
Italy
126 New Zealand ↑ Germany
156 Pan-Asia ↑ Spain
↑ Singapore ↑ U.K.
↑ India ↑ Netherlands
↑ Thailand ↑ Sweden
↑ Hong Kong ↑ France
↑ Indonesia ↑ Austria
↑ Malaysia ↑ Switzerland
↑ Philippines ↑ Belgium
181 North America ↑ Denmark
181
South America
↑
Finland
↑ Bolivia ↑ Portugal
↑ Chile ↑ Ireland
↑ Peru ↑ Norway
↑ Argentina 253 Israel
181 Brazil 253 Middle East
254 Taiwan 253 South Africa
097 Korea 253 Turkey
038 China 253 Russia