Kyocera TASKalfa 8002i

2NJ/2RK
2-45
(18-3) Adjusting the halftone automatically (Maintenance mode U410)
1.Input "410" using the numeric keys.
2.Press the [Start] key.
* :Execution information screen is displayed.
* :Test pattern 1 and Test pattern 2 are output on A4/ letter paper.
3.Set the Test Pattern 1 output as the original. Place the edge with
the arrows toward the back and the printed side facing down on the platen.
* :Set test pattern 1 and place approximately 20 sheets of white paper on it.
Figure 2-81
4.Press the [Start] key.
* :The 1st auto adjustment is executed.
5.Set the output Test Pattern 2 as the original.
* :Set test pattern 2 and place approximately 20 sheets of white paper on it.
6.Press the [Start] key.
* :The 2nd auto adjustment is executed.
7.[Finish] appears after normal completion.
8.Press the [Stop] key.
(18-4) Output Maintenance report (Maintenance mode U000)
1.Input "000" using the numeric keypad and press the [Start] key.
2.Select [Maintenance] and press the [Start] key to output the maintenance report.
3.Press the [Stop] key.
(18-5) Clearing the counts (Maintenance mode U927)
1.Input "927" using the numeric keypad and press the [Start] key.
2.Select [Execute].
3.Press the [Start] key to clear the counter value.
4.Press the [Stop] key.
(18-6) Setting the delivery date (Maintenance mode U278)
1.Input "278" using the numeric keypad and press the [Start] key.
2.Select [Today].
3.Press the [Start] key to set the delivery date.
4.Press the [Stop] key.