Kyocera TASKalfa 8002i

2WA/2NJ/2RK-1
9-12
9-4 Chart of image adjustment procedures
Adjusting
order
Item Image
Maintenance mode
Page
Setting procedure
Remarks
Item No. Mode Method Setting
1
Adjusting the center line of the MP
tray
(Adjustment of writing)
Changes the LSU writing start tim-
ing.
U034 LSU Out Left P.6-38 1. Press the Start key.
2. Select the adjustment content.
[LSU Out Left] -[MPT]
3. Press the System Menu key.
4. Press the Start key.
(Pattern output)
5. Press the System Menu key.
6. Execute the adjustment.
1. By using the [Left/Right],[+/-]
cursor or the numeric keys,
change the setting value.
2. Press the Start key to set the
setting value.
Press the [Stop] key.
*When the setting value is increased, the image
moves rightward.
*When adjusting for the duplex copy, select
[Duplex].
2
Adjusting the center line of the
cassettes
(Adjustment of writing)
Changes the LSU writing start tim-
ing.
U034 LSU Out Left P.6-38 1. Press the Start key.
2. Select the adjustment content.
LSU Out Left -
[Cassette1] to[Cassette7]
3. Press the System Menu key.
4. Press the Start key.
(Pattern output)
5. Press the System Menu key.
6. Execute the adjustment.
1. By using the [Left/Right],[+/-]
cursor or the numeric keys,
change the setting value.
2. Press the Start key to set the
setting value.
Press the [Stop] key.
*When the setting value is increased, the image
moves rightward.
*When adjusting for the duplex copy, select
[Duplex].
3
Adjusting the leading edge regis-
tration of the MP tray
(Adjustment of writing)
Changes the secondary paper
feed timing.
U034 LSU Out Top P.6-38 1. Press the Start key.
2. Select the adjustment content.
[Lsu Out Top] -[MPT(L)]
3. Press the System Menu key.
4. Press the Start key.
(Pattern output)
5. Press the System Menu key.
6. Execute the adjustment.
1. By using the [Left/Right],[+/-]
cursor or the numeric keys,
change the setting value.
2. Press the Start key to set the
setting value.
Press the [Stop] key.
*When the setting value is increased, the image
moves downward.
*When adjusting for the duplex copy, select
[Duplex].
4
Adjusting the leading edge regis-
tration of the cassette
(Adjustment of writing)
Changes the secondary paper
feed timing.
U034 LSU Out Top P.6-38 1. Press the Start key.
2. Select the adjustment content.
[Lsu Out Top] - [Cassette(L)]
3. Press the System Menu key.
4. Press the Start key.
(Pattern output)
5. Press the System Menu key.
6. Execute the adjustment.
1. By using the [Left/Right],[+/-]
cursor or the numeric keys,
change the setting value.
2. Press the Start key to set the
setting value.
Press the [Stop] key.
*When the setting value is increased, the image
moves downward.
*When adjusting for the duplex copy, select
[Duplex].
5
Adjusting the leading edge margin
(Adjustment of writing)
Changes the LSU illumination start
timing.
U402 Lead P.6-165 1. Press the Start key.
2. Select the adjustment content.
[Lead]
3. Press the System Menu key.
4. Press the Start key.
(Pattern output)
5. Press the System Menu key.
6. Execute the adjustment.
1. By using the [Left/Right],[+/-]
cursor or the numeric keys,
change the setting value.
2. Press the Start key to set the
setting value.
Press the [Stop] key.
*When the setting value is increased, the image
get longer.
$
$
$
$
$