Kyocera TASKalfa 8002i

2WA/2NJ/2RK-2
6-38
Contents
Adjust the leading edge registration or center line.
Purpose
Executed if there is a regular error between the leading edges of the copy image and original.
Adjusted if there is a regular error between the center lines of the copy image and original.
Method
1.Press the [Start] key.
2.Select the item to adjust.
* :The screen for adjusting is displayed.
Adjustment: LSU Out Top
1.Select the item to adjust.
2.Press the [System Menu] key.
3.Press the [Start] key to output a test pattern.
4.Press the [System Menu] key.
U034 Paper timing data adjustment
(Message: Adjust Paper Timing Data)
Items Contents
LSU Out Top Adjust the leading edge timing
LSU Out Left Adjusts the center line
Items Contents Setting
range
Data
variation
Initial
setting
MPT(L) Adjust the leading edge timing for the MP
tray (L)
-3.0 to 3.0 0.1mm 0
MPT Half(L) Adjust the leading edge timing for the MP
tray Half (L)
-3.0 to 3.0 0.1mm 0
Cassette(L) Adjust the leading edge timing for the cas-
sette paper feed (L)
-3.0 to 3.0 0.1mm 0
Cassette
Half(L)
Adjust the leading edge timing for the cas-
sette paper feed Half (L)
-3.0 to 3.0 0.1mm 0
Duplex(L) Adjust the leading edge timing for the
duplex copy (L)
-3.0 to 3.0 0.1mm 0
Duplex
Half(L)
Adjust the leading edge timing for the
duplex copy Half (L)
-3.0 to 3.0 0.1mm 0
MPT(S) Adjust the leading edge timing for the MP
tray (S)
-3.0 to 3.0 0.1mm 0
MPT Half(S) Adjust the leading edge timing for the MP
tray Half (S)
-3.0 to 3.0 0.1mm 0
Cassette(S) Adjust the leading edge timing for the cas-
sette paper feed (S)
-3.0 to 3.0 0.1mm 0
Cassette
Half(S)
Adjust the leading edge timing for the cas-
sette paper feed Half (S)
-3.0 to 3.0 0.1mm 0
Duplex(S) Adjust the leading edge timing for the
duplex copy (S)
-3.0 to 3.0 0.1mm 0