Kyocera TASKalfa 8002i

2WA/2NJ/2RK
7-577
(22)Data is not printed out due to the printer driver setting
Check if the issue occurs when printing the data from all PCs in the network or from a certain PC. Then, print
out the data from another PC if it occurs at a certain PC.
(23)Data is not printed out due to the printer driver setting
The incorrect printer driver was selected.
(24)Data is not printed out due to the printer driver setting
Installed printer driver shows "Deleting" and it remains when reinstalling it
Step Check description Assumed cause Measures Reference
1 Checking the IP address The IP address is not prop-
erly set.
Check if the IP Address indi-
cated in the main unit status
report and system menu is
same as the IP address in the
port setting of [Printer Proper-
ties] at the PC. If not, correct
the IP address at the port set-
ting
Step Check description Assumed cause Measures Reference
1 Installing the printer driver The incorrect printer driver
is selected.
Select the correct printer
driver. If it is not in the PC,
install the printer driver for the
destination unit in the PC.
Step Check description Assumed cause Measures Reference
1 Deleting the job The print jobs remain in
the spool inside the printer
driver.
Delete all print jobs spooling
inside the printer driver.
?
2 Checking the printer driver There is the unused printer
driver.
Delete the unused printer
driver.
3 Restarting the print The system is pausing. Right click the pausing printer
icon and select [Print resum-
ing]. Then, check the ready
port.
4 Checking the settings The host name or the IP
address is not properly set.
When the main unit connects
to a local network, check the
host name and the IP
address on the status report
of the main unit.
5 Adding the Standard TCP/
IP port
There is no main unit IP
Address in the Standard
TCP/IP Port
Add the main unit IP address
in Standard TCP/IP port and
print Test Page