Kyocera TASKalfa 8002i

2WA/2NJ/2RK
3-93
(5-3) Finishing section
The finishing section consists of the parts below and the paper conveyed from the main unit is ejected to
the DF tray A. Also, bundle eject mode and staple mode are processed.
Also, for folding, switch the paper conveying path to the relief drum side by the feedshift guide 1.
Components parts
1. DF relief drum
2. DF conveying pulley
3. DF conveying pulley
4. DF feedshift guide 1
5. DF feedshift guide 2
6. DF drum sensor
7. DF actuator
(DF drum sensor)
8. DF middle sensor
9. DF actuator
(DF middle sensor)
10. DF Middle roller
11. DF Middle pulley
12. DF tray A eject roller
13. DF eject pulley
14. DF eject sensor
15. DF bundle eject unit
16. DF side registration sensor 1
17. DF side registration sensor 2
18. DF staple unit
19. DF slide sensor
20. DF tray A
Figure 3-81
Figure 3-82
7
6
5
910 1
2
3
4
14
13
12
16,17
15
18
11
19
8
20
2
3
20
13
12
5
1
9
11
10