Kyocera TASKalfa 8002i

2NJ/2RK
2-42
(16)Default Setting
The Machine Setup Wizard is launched when the equipment is turned on for the first time after being installed. Avail-
able of setting the necessary items. Also, it can beset from System Menu as below.
Figure 2-80
(16-1)Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
1. Display the screen
[System Menu/ Counter] key or [System Menu] key > [Date/Timer/Energy Saver]
2. Configure the settings
[Time Zone] > [Date/Time] > [Date Format]
Item Description
Time Zone Set the time difference from GMT. Choose the nearest listed location from
the list. If you select a region that utilizes summer time, configure settings for
summer time.
Date/Time Set the date and time for the location where you use the machine. If you per-
form Send as E-mail, the date and time set here will be displayed on the
header.
Value: Year (2000 to 2037), Month (1 to 12), Day (1 to 31), Hour (00 to 23),
Minute (00 to 59), Second (00 to 59)
Date Format Select the display format of year, month, and date. The year is displayed in
Western notation.
Setting: month/day/year, day/month/year, year/month/day
[System Menu/ Counter] key