Kyocera TASKalfa 8002i

2WA/2NJ/2RK
4-234
(3-3) Detaching and reattaching the PF main PWB
Procedures
1. Remove four screws (a)(M3x8).
2. Remove PF rear cover (c) from the
paper feed unit (b).
Figure 4-359
3. Disconnect all the connectors from the
PF main PWB (a).
4. Remove two screws (b)(M3x8).
5. Remove the PF main PWB (a) from two
hooks (c).
6. Check or replace the PF main PWB (a),
and then reattach the parts in the origi-
nal position.
Figure 4-360
a
a
a
b
c
a
14j0537
a
b
b
c
YC5
YC4
YC13
YC1
YC6
YC3YC18
YC16
YC7
YC10
YC8
YC15
YC17
YC14
YC12
YC11
YC2