2WA/2NJ/2RK
4-233
3. Release six wire stoppers (d) and one
cable lamp, and then remove the wire
of PF lift motor (a).
4. Disconnect the connector (b) and the
connector (c).
Figure 4-357
5. Remove three screws (b)(M3x8) and
detach the PF lift motor (a).
6. Check or replace the PF lift motor unit
(a), and then reattach the parts in the
original position.
Figure 4-358
d
d
d
d
b
d
c
a
d
e
14j0540
b
a
b
b
14j0541
To Next Page
Loading...
