2NJ/2RK-1
2-29
(12-3) Set paper in the large capacity feeder
*: Set the paper to the cassette 3, cassette 4, optional cassette 6(PF-740) and cassette 7(PF-740). The following pro-
cedure is an example for the 3rd cassette.
*: The following procedures are for Metric mode. The parts below are necessary to change paper size from Letter to
A4/B5 in Inch mode.
Paper size guide B: 303NF1007_ CURSOR END DECK, 303NF1041_ CURSOR END SUB
Paper size guide C: 303NF1052_ CURSOR END A4
*: Corresponding paper size sheet is necessary to change to Letter in Metric mode or to A4 or B5 in Inch mode
Letter: 303RC34020 SHEET PAPER SIZE I C
1. A4 or B5: 302ND3413_ SHEET PAPER SIZE M BPull out the cassette in front full.
Figure 2-52
2. Adjust the cassette size.
1.Detach to turn the fixed material(b) of paper size guide A(a) and then pull out one.
Figure 2-53
To Next Page
Loading...
